Products

Key facts LTE, 5G FR1 frequency range up to 8 GHz and FR2 milimeter-wave frequency range up to 50 GHz in one instrument Support of 5G stand-alone mode / non-stand-alone mode Capable of large variety of present and future LTE and 5G 3GPP band combinations Future proof modular and scalable HW-architecture Web-based CMsquares user interface for RF-, functional-, application- and protocol test The next generation of mobile radio testing The R&S®CMX500 radio communication tester is the future-proof solution for 5G NR testing, featuring an intuitive and flexible web-based user interface, the R&S®CMsquares. Supporting manual interactive operation as well as automatically sequence-controlled test protocols makes the R&S®CMsquares an advantageous software solution, with unique modules for all signaling use cases. These range from R&D design stages up to end-to-end application testing, production and conformance tests. The introduction of a one-platform strategy for all 5G NR test equipment enables a unified test environment for signaling and non-signaling testing through all stages of 5G device production.

Key facts Preselection filters Time domain scan Tracking generator Battery operation Pulse protected input Quick, precise and compliant EMI measurements up to 30 MHz. The R&S®EPL1000 fully complies with CISPR16-1-1. The very fast time domain scan can check the complete CISPR bands A or B in a single shot. Built-in preselection ensures a high dynamic range and enables the acquisition of short pulses. The R&S®EPL1000 offers 4-channel click rate analysis, a spectrogram function, IF analysis and further functions for detailed analysis. Automation simplifies measurements and ensures exact reproducibility of test sequences. These and many more functions make the R&S®EPL1000 ideal for conducted voltage and current measurements. Typical applications include precompliance measurements, precertification and certification in line with IEC, EN, CISPR and FCC.

Key facts Fully calibrated solution Ease of operation Integrated to base units Smart accessories Compact form factor Frequency extension to 110 GHz The R&S®FE110ST extends the frequency of the R&S®SMW200A and R&S®SMM100A vector signal generators to the frequency range from 70 GHz to 110 GHz. After connection via LAN interface the frontend is fully integrated to the firmware of the base units. This ensures an easy-to use and calibrated solution which acts like one instrument. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

Experience high performance wherever you take it Key facts Frequency range 5 kHz to 26.5 GHz SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz Lightweight with small footprint 40 MHz analysis bandwidth (option) Brief description In an RF lab, the R&S®FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.

The R&S®FSH spectrum analyzer is rugged, handy and designed for use in the field. Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work. The R&S®FSH is a handheld spectrum analyzer and – depending on the model and the options installed – a power meter, a cable and antenna tester and a two-port vector network analyzer. It provides the three most important RF analysis functions that an RF service technician or an installation and maintenance team needs to solve daily routine measurement tasks. For example, it can be used for maintaining or installing transmitter systems, checking cables and antennas, assessing signal quality in broadcasting, radiocommunications and service, measuring electric field strength or in simple lab applications. The R&S®FSH can perform any of these tasks quickly, reliably and with high measurement accuracy. Key Facts - Frequency range from 9 kHz to 3.6/8/13.6/20 GHz - High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz)) - 20 MHz demodulation bandwidth for analyzing LTE signals - Low measurement uncertainty (< 1 dB) - Measurement functions for all important measurement tasks related to the startup and maintenance of transmitter systems - Internal tracking generator and VSWR bridge with built-in DC voltage supply (bias) - Two-port network analyzer - Rugged, splash-proof housing for rough work in the field - Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys - Easy operation thanks to user configurable, automatic test sequences (wizard)

The R&S®FSV and the R&S®FSVA are a family of versatile signal and spectrum analyzers for users working in the development, production, installation and servicing of RF systems. The R&S®FSV is the ideal instrument for all general-purpose measurement tasks – on the bench, in production, and in the field. It provides digital modulation analysis for the latest cellular and wireless standards with up to 160 MHz analysis bandwidth for measurements on components, chipsets and base stations. Typical measurement tasks include standard-compliant spectrum emission mask measurements as well as spurious emission and adjacent channel leakage ratio (ACLR) measurements. Measurement applications for EMI diagnostics, phase noise, noise figure, analog demodulation and vector signal analysis complete the range of functions offered by the versatile R&S®FSV. Key Facts - Frequency range up to 4/7/13.6/30/40 GHz - Up to 160 MHz signal analysis bandwidth - Convenient, intuitive operation with touchscreen based user interface 5 GHz - 0.4 dB level measurement uncertainty up to 7 GHz - –110 dBc (1 Hz) phase noise at 10 kHz frequency offset - +15 dBm third-order intercept (TOI) - Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz - General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics - Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth® - Frequency range up to 500 GHz with harmonics mixers - Keeping test data confidential with removable solid state or hard disk drives

Key facts Frequency range from of 10 Hz to 4, 7.5, 13.6, 30 or 44 GHz Analysis bandwidth up to 200 MHz SSB phase noise at 10 kHz offset (1 GHz): –114 dBc/Hz GUI with multi-touch, SCPI recorder and event based actions Options for analog and digital signal analysis, including 5G NR Fast and simple setup provides fast access to measurement results Measurements at the push of a button, capturing rare events with event based actions and simple script programming with the SCPI recorder – setting up complex measurements in no time is the strength of the R&S®FSV3000 signal and spectrum analyzer. Its other major advantage is its fast measurement speed, allowing high throughput in production applications.

Key facts Frequency range from 10 Hz to 4, 7.5, 13.6, 30, 44, 50 GHz Analysis bandwidth up to 200 MHz SSB phase noise at 10 kHz offset (1 GHz): –114 dBc/Hz GUI with multi-touch, SCPI recorder and event based actions Options for analog and digital signal analysis, including 5G NR Fast and simple setup for fast access to measurement results The R&S®FSV3000 signal and spectrum analyzer performs measurements at the push of a button, uses event based actions for capture and makes script programming simple with a SCPI recorder – for quick setups of complex measurements. Fast measurement speeds for high throughput in production applications are another major advantage.

* Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz * 40 MHz real-time analysis bandwidth for: * Spectrum with persistence function * Spectrogram display * Display of power versus time * Triggering on frequency masks * Full-featured signal and spectrum analyzer with analysis software for GSM/EDGE, WCDMA/HSPA+, LTE, WiMAX™, WLAN, analog and digital modulation methods, noise figure and phase noise measurements * Exchangeable hard disk for applications that involve the use of confidential data LXI Class C conformant

Setting standards in RF performance and usability The high-performance R&S®FSW signal and spectrum analyzer was developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy. Key Facts - Frequency range from 2 Hz to 8/13.6/26.5/43.5/50/67/85 GHz (with external harmonic mixers from Rohde & Schwarz up to 500 GHz) - Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier) - –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements - Up to 2 GHz analysis bandwidth - < 0.4 dB total measurement uncertainty up to 8 GHz - Real-time analysis up to 512 MHz bandwidth - High-resolution 12.1" (31 cm) touchscreen for convenient operation - Multiple measurement applications can be run and displayed in parallel

High‑end analysis of signal sources and components Key facts High end signal and spectrum analyzer and phase noise tester in one box Very high sensitivity for phase noise measurements even on pulsed signals through cross correlation with unrivaled performance close to carrier Frequency range from 1 MHz up to 50 GHz, 500 GHz with external mixers Internal source for measuring residual phase noise, also on pulsed signals Simultaneous measurement of phase noise and amplitude noise Unrivaled low phase noise The R&S®FSWP phase noise analyzer and VCO tester features very high sensitivity thanks to extremely low-noise internal sources and cross-correlation. It can measure phase noise and amplitude noise in mere seconds on highly stable sources such as those in radar applications. Additional options such as pulsed signal measurements, residual phase noise (including pulsed) characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument.

One, two or three channels – R&S®HMC804x power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the linear power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the R&S®HMC804x, even in 19" racks. The R&S®HMC804x family consists of three models with a maximum total power of up to 100 W and a continuous voltage range from 0 V to 32 V. The one-channel R&S®HMC8041 delivers a maximum of 10 A, the two-channel R&S®HMC8042 a maximum of 5 A and the three-channel R&S®HMC8043 a maximum of 3 A per channel. The two-channel and three-channel models enable users to connect multiple outputs in parallel or in series to increase the voltage or current. The outputs are galvanically isolated, floating, and protected against overloading and short circuits. Voltage, current and power values are output on a brilliant QVGA display The R&S®HMC804x offers a wide range of logging functions, an integrated energy meter and electronic fuses that can be individually combined for each channel, making it ideal for hardware developers, labs and industrial environments. Linear switching power supplies ensure high efficiency, for minimum heat dissipation even at full load. Developers and industrial users benefit from useful functions such as sequenced start of channels, EasyArb and EasyRamp functions that are directly programmable on the device, an analog input for external control of voltage values, an external trigger input for controlling channels and arb steps, and adjustable overvoltage/overpower protection for each channel. All connectors, including SENSE, are available on the rear panel. A cage clamp facilitates rack installation and deinstallation. The LXI-compliant power supply can be controlled via LAN, USB or an optional GPIB interface. The CDC (virtual COM port) and TMC classes are supported for communications via USB. The remote control commands are based on the SCPI standard. The R&S®HMC804x power supplies from the Rohde & Schwarz value instruments product range offer top quality and intelligent, practical functions at an extremely attractive price.

The top-class in component testing Key facts Frequency range upgradeable to 10 MHz Basic accuracy of ±0.05 % for impedance measurements Basic accuracy of ±0.03° for phase measurements DC bias up to 40 V Data logging function The top-class in component testing The R&S®LCX LCR meters are versatile, extremely accurate and perform measurements quickly. They are ideal for challenging applications in research, development and production. Two instrument models and various options cover applications with a test signal frequency of up to 10 MHz. Internal and external bias functions, comprehensive analysis options and versatile test fixtures expand the wide range of possible applications.

Key facts Bandwidth: 4 channel: 350 MHz - 2 GHz | 8 channel: 100 MHz - 2 GHz World’s fastest oscilloscope with an update rate > 4.5 million waveforms per second Industry-leading system architecture: 18-bit vertical resolution/12-bit ADC Deepest in class standard memory: 500 Mpoints Industry leading simultaneous spectrum acquisition rate of 45,000 FFT/s and up to 4 spectra Next generation oscilloscope: evolved for more challenges The R&S®MXO 5 Series delivers breakthrough oscilloscope technology to speed up understanding and testing of electronic systems. The specifications for both the 4 and 8 channel models make the R&S®MXO 5 Series the industry leader in cutting-edge technology for swift and precise results. The oscilloscopes' advanced customized technology and revolutionary features are indispensable for insight into circuit behavior. The impressive 15.6" Full HD capacitive touchscreen and whisper-soft audible operating noise maximize R&S®MXO 5 Series performance and minimize power consumption.