Products

Key Facts - Measurement range: DC to 100 kHz - Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F - Basic accuracy: 0.015 % (DC) - 5¾-digit display (480 000 counts) - Simultaneous display of three measurement functions, e.g. DC + AC + statistics - Measurement rate: up to 200 values/s - Measurement functions: V (DC), I (DC), V (AC), I (AC), frequency, DC power, resistance (two and fourwire), temperature (PT100/PT500/PT1000), capacitance, diode and continuity test - Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm - Data logging to internal memory or USB flash drive in CSV format - Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB) - SCPI commands largely compatible with Agilent 34410A (HMC8012-G) - HMC8012-G: HMC8012 incl. IEEE-488 (GPIB) interface

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements. The easy-to-use analyzer features a touchscreen and large keypad. Key Facts - Frequency range from 2 MHz to 3 GHz/4 GHz, upgrade via keycode - DTF, return loss, VSWR and one-port cable loss measurements - Ideal for field use: 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51) - Large color touchscreen - Measurement wizard to speed up measurements and eliminate human errors - Easy and cost-efficient upgrades of all options via software keycode

When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device. Key Facts - 60 MHz to 500 MHz with 5 Gsample/s sampling rate - Isolated channels with CAT IV 600 V / CAT III 1000 V rating - 10-bit ADC - 50 000 waveforms per second - Capacitive touch and keypad operation - 8 in 1: Lab performance oscilloscope, logic analyzer, protocol analyzer, data logger, digital multimeter, spectrum analyzer, harmonics analyzer and frequency counter - IP51 housing meeting military environmental requirements - Wireless LAN and Ethernet for web-based remote control and quick data access

New: Up to 2 GHz internal modulation bandwidth The R&S®SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality. The R&S®SMW200A is the ideal generator for digitally modulated signals required for the development of new wideband communications systems, the verification of 3G and 4G base stations or in the aerospace and defense sector. The I/Q modulation bandwidth of up to 2 GHz with internal baseband satisfies fourth- and fifth-generation standards (e.g. 5G, LTE-Advanced and IEEE 802.11ac/ad), and the R&S®SMW200A is designed to meet future requirements. Its modular scalable architecture allows users to optimize the generator to their applications and to upgrade it as required. A second RF path can be added, as well as a maximum of two baseband and four fading simulator modules – without compromising on signal quality. As a result, the R&S®SMW200A can create signal scenarios that previously required multiple instruments or could not be implemented at all. From MIMO up to 8x2 and LTE-Advanced carrier aggregation including fading to multistandard radio – never before has an instrument offered such high-class signal generation capability. If more than two RF paths are required, additional R&S®SGMA signal generator modules can be connected. The intuitive, touchscreen-based operating concept provides the user with an overview of measurements, no matter how complex, and quickly delivers the desired results. Key Facts - Frequency range from 100 kHz to 3 GHz, 6 GHz, 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz - Optional second RF path with 100 kHz up to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz - Versatile configuration: from single-path vector signal generator to multichannel MIMO receiver tester - Ideal for MIMO, MSR or LTE-Advanced applications thanks to up to eight signal sources and up to 32 fading channels - Modular architecture for optimal adaptation to the application at hand

Leading in speed, dynamic range and ease of operation. Frequency ranges from 9 kHz to 40 GHz More than 60 years of experience in the field of vector network analysis pay off: Rohde & Schwarz sets new benchmarks with its R&S®ZNB family of vector network analyzers. These analyzers feature high measurement speed, outstanding precision and exceptional ease of operation. Key Facts - Frequency range from 9 kHz up to 40 GHz - Wide dynamic range of up to 140 dB - Short sweep times, e.g. 4 ms for 401 points - High temperature stability of typ. 0.01 dB/°C - Wide power sweep range of 98 dB - Wide range of IF bandwidths from 1 Hz to 10 MHz - Manual and automatic calibration - Large, high-resolution 12.1" screen - Touchscreen user interface - Two or four ports - Four-port model with two independant generators - Expansion to up to 48 ports using switch matrices

Basic, solid-performance network analysis The R&S®ZND is a basic network analyzer that provides unidirectional measurements up to 4.5 GHz. Options are available to perform bidirectional measurements and to extend the frequency range to 8.5 GHz. Key Facts - Two-port network analyzer for unidirectional measurements from 100 kHz to 4.5 GHz - Frequency range can be extended to 8.5 GHz - Test set can be enhanced for bidirectional measurements - Touchscreen operation - Dynamic range up to 120 dB - Power sweep range up to 48 dB - Bandwidths from 1 Hz to 300 kHz - More than 100 traces and channels - Compatible with all Rohde & Schwarz network analyzers

The 19”, 3U power distribution unit Rack Safety Plus supplies AC mains power and DC power to electrical or electronic devices as a central power switch with emergency stop function. 400 V 3-phase, 230 V 1-phase mains input with mains fuses, 1-phase 120 V AC (phase to neutral) or 1-phase 208 / 240 V AC (phase to phase or phase to neutral) AC outputs with different connector types from Schuko, C13, C19, NEMA 5-15R etc. connectors, switched by ON/OFF switch Permanent AC Outputs (Service) All outputs are protected by circuit breakers The emergency stop function meets the requirements of EN 60947-5-1 and EN 60204-1 and is vandalism-proof Choose a standard configuration, or quickly and easily create own configuration from predefined components.

The Keysight 34470A 7½ digit, Performance Truevolt Digital Multimeters offer higher levels of accuracy, speed and resolution. - Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis. - Measure with confidence, with high basic DCV accuracy of 16 ppm. - Test low power devices with 1 µA range and pA resolution. - Flexibly automate measurements over USB or LAN/LXI core interface. - Digitizing and advanced triggering (DIG) now included.

Digital accelerometer with three directions. Connect to Ethernet port on computer and run directly with the included software.

Learn about our build to print service for test platforms. The 6TL22 platform is a perfect base for the conception of a real modular Automatic Test Equipment for low to mid manufacturing volumes. A system designed around the 6TL22 is simple, easy to maintain and cost-effective. The rack is compatible with a the direct integration of the three platform-based receivers from Virginia Panel (S6, G12 and G12X). The core of the system can be either an industrial PC or a NI-PXI. A UPS will protect the valuable instrumentation as well as control all the steps for an automatic power-up and down of the test system. Thanks to the power management unit (MMI), the interaction and control with the system, as well as the basic safety functions, are implemented out of the box.

The 6TL36 test handler is the first ATE handler on the market that easily integrates the radio frequency tests into mass production lines. The modular approach of the 6TL36 offers the possibility of adding handlers together for a work in parallel that reduces the cycle time and saves costs as well as space, when comparing to traditional parallel solutions. Therefore, the system can be ordered with only one conveyor, with two conveyors (bypass or dual-line) and with three conveyors (Retour conveyor). The 6TL36 is the best production solution to test the products that feature the latest challenges set out by the IoT and the manufacturing of connected products.

The MITI-7 ultra-miniature reed switch is a normally open switch with a 7 mm x 1.8 mm (0.276” x 0.071”) glass envelope, which can switch up to 10 W . It has a sensitivity range of 6-20 AT. It has a high insulation resistance of 1012 ohms minimum and low contact resistance of less than 150 milliohms. The MITI-7 is also available in a surface mount version, that is, MISM-7. Benefits Hermetically sealed switch contacts are not affected by and have no effect on their external environment Very low space requirement Zero operating power required for contact closure Excellent for switching micro-controller logiclevel loads Features Ultra-miniature, normally open switch Capable of switching 170 Vdc or .25 Adc at up to 10 W Available sensitivity range 6-20 AT Markets/Applications Position sensing in Security systems Metering Industrial controls Automated test equipment Small appliances Reed relays

For fast, comfortable and convenient work in production, assembly and rework. The A60 reveals up to 80% more of your sample surface area than comparable stereo microscopes. View your sample from overview to the finest details easily with the 46 mm object field. Optimally suited to the requirements of micro-manufacturing, the Leica A60 stereomicroscope system can effectively increase productivity. With sophisticated Leica Microsystems' precision optics, working with the microscope is significantly faster and more convenient. A low cost of ownership makes the Leica A60 an investment that pays off.

Feed through Filters provide significant Insertion loss over a wide range of frequency up to 1GHz. Construction of Feedthrough Filters results in an excellent performance.