Products

OvenGUARD system is a stove/oven timer with overheating and fire protection device. The unit is for normal household oven/stove where the user can activate a timer on the controller such as 30 min,2 hours or 5 hours and the system after the timer ends will automatically turn off the stove/oven. The system has temperature sensor which detects if there is a fire on the stove and will turn off the current to the oven. This system is easy to use and user friendly and cheaper then other likewise systems on the market today. The OvenGUARD system is for a protection for standard household ovens where fire started on the stove during cooking causes deaths and damage to apartments and homes due to negligence. With this OvenGUARD system fires are prevented before it spreads to other areas. This OvenGUARD system is suitable for normal household stove/oven and it is easy to install. It is a *plug and play* device. The OvenGUARD system is CE-certified and has the necessary safety standards tested according to EU-regulations. The OvenGUARD system is for stoves/oven with 400 VAC 3-phase voltage and maximum current of 16 Amps. It is now on sale for 325 euros with shipping included within Sweden.

Lasertech är en helhetsleverantör och vi levererar gärna så komplett produkt som möjligt. Tillsammans med våra systerbolag i XANO har vi många möjligheter att komplettera din produkt. Nedanstående är exempel på andra tjänster vi erbjuder: – Skärande bearbetning – 3D skanning – Ytbehandling – Montering – Värmebehandling – Mätning

Each inspection – sometimes thousands per client – is quickly and accurately recorded in a software solution using RFID tags. The smallest tagged item is a 5 cm hammer; the largest is a crane with a 23-meter span. Regular inspections ensure safe working conditions: safety checks and measures like rope protection help prevent accidents and ensure the functionality of equipment and installations. The protection of employees and the prevention of workplace accidents are the primary reasons for regular inspections in industrial facilities, construction sites, and laboratories. Ultimately, it's about ensuring that machines, electrical devices, gate systems, or lifting equipment are functioning safely and correctly. Inspections are carried out at legally required intervals. After each inspection, a protocol is generated and an inspection seal is issued. This serves as proof for authorities and insurers that inspection schedules are followed and functionality is confirmed. Beyond legal compliance, inspections also support predictive maintenance and repair planning – a factor that is becoming increasingly important for equipment operators and machine operators. Each inspection – sometimes thousands per customer – is quickly and accurately recorded in our software using RFID tags. Clients can access our inspection portal at any time to check whether a device has passed or if repairs are due. Various methods are used when inspecting lifting equipment. These include a visual inspection, which identifies wear and damage, followed by functional testing to check components such as brakes, controls, and load-bearing capacity. The final step is a load test, which ensures the stability and reliability of the lifting equipment under real operating conditions. For electrical equipment, insulation resistance and protective earth resistance are measured. Special attention is paid to the proper functioning of residual current protection devices.

Introducing TOUGH patch cables: the embodiment of internal finesse, reinforced by an external shield. Born from the essence of SLIM patch cables, these marvels are reinforced with an additional nylon jacket, forging a bond of mechanical might. In the realm of rugged domains and the dynamic landscapes navigated by field technicians, TOUGH patch cables emerge as a beacon of unwavering reliability. Enter the unshielded variety, where the ingenuity of SLIM UTP cable meets the rugged embrace of nylon to create a symphony of strength and precision. Meticulously engineered to meet the Channel Category 6 standard of ISO/IEC and EN50173, these cables are built to last. Elevate your connectivity with TOUGH patch cables, where toughness meets finesse, and your network strides confidently into any challenge.

See the PBT CompaCLEAN III live at our booth. A compact, high-performance cleaning system for PCB assemblies, designed for consistent and controlled removal of flux residues and contamination. With closed-loop technology, precise process control and uniform spray coverage, it ensures repeatable cleaning quality and supports reliable electronics production.

TLT PCB, a specialized division of TLT Manufacturing based in Vilnius, Lithuania, focuses on producing printed circuit boards for demanding applications in defense, aerospace, and industrial sectors. As a European manufacturer, we prioritize reliability, EU-based operations, and transparent supply chains to help partners address sourcing needs and reduce exposure to external risks. TLT PCB is actively developing its capabilities to handle more complex PCB requirements, positioning itself as an emerging, dependable option for leading European EMS providers and major players in these high-reliability fields who value proximity, compliance, and growing technical readiness.

“Right First Time” Manufacturing and Assembly of Your Prototype and Small series PCB’s is our goal. To achieve this, we provide Free to use Online Tools for DRC & DFM checks which we back with our easy to reach Multilingual Customer Support Team. We excel at Order pooling and use this to keep Costs Down. Order pooling is where we combine different orders on the same production panel this maximise the panel usage, thus reducing costs and enables Faster Standard Deliver Terms. All of this helps you deliver your Projects On-Time and within Budget so that they can be the best and most cost-effective on the market.