Testhouse Nordic AB

EDU36311A Smart Bench Essentials DC Power Supply

EDU33212A Waveform Generator, 20 MHz, 2 Channel

EDU34450A Smart Bench Essentials Digital Multimeter

DSOX1204G Oscilloscope: 70/100/200 MHz, 4 Analog Channels, with a Built-in Waveform Generator

CNT-104S Multi-Channel Frequency Analyzer

• Four channel 400 MHz Frequency Analyzer - plus optional RF-channel up to 24 GHz • NEW measurement modes: 4 parallel counters in one box; Multistop Time Interval • Gap-free zero-dead-time frequency/ period measurements • Ultra-high resolution: Time: 7 ps; Freq.: 12-13 digits/s • Ultra-high meas. speed: up to 20M meas./s to internal memory • Fast bus speed; 170k meas/s in block mode • Graphic touch screen display for settings and display of values, statistics (numeric and distribution graph), trend & modulation domain • The instrument can be controlled locally via touch screen or mouse, or remotely (from anywere in the world) - via web interface or VNC • Intelligent and easy-to-use

MSOX4154G Mixed Signal Oscilloscope: 1.5 GHz – Keysight

- 1.5 GHz - 4 analog plus 16 digital channels - Easily view signals on the large 12.1-inch capacitive touch screen - Isolate signals in seconds with exclusive Zone touch triggering - Capture more data with 4 Mpts memory and standard segmented memory - See more signal detail with 1,000,000 wfms/s update rate - Expand your measurement capabilities with full upgradability: Add dual-ch 20 MHz arbitrary WaveGen, 3-digit DVM, serial trigger and analysis & mask testing at any time

HD304MSO InfiniiVision HD3 Series Oscilloscopes – Keysight

- 4x the resolution, ½ the noise floor in a portable oscilloscope - Increase vertical resolution by four times with a 14-bit analog-to-digital converter (ADC). - See smaller signals with a 50 µVRMS noise floor. - Identify infrequent signal glitches with an uncompromised 1.3M waveform / second update rate enabled by a custom ASIC. - Capture and analyze more signals at once with 100 Mpts of deep memory. - Display up to four independent signals and control the scaling individually.

E36155A 800W Autoranging Benchtop Power Supply, 60V, 40A – Keysight

Output Rating- 800 W - Output 1: 0 to 60 V, 0 to 40 A Programming Accuracy ± (% of output + offset) - Voltage: 0.03% + 10 mV - Current: 0.1% + 10 mA Ripple & Noise (20 Hz to 10 MHz) - Normal mode Voltage: <50 mV p-p - Normal-mode Voltage: <5 mV rms Readback Accuracy ± (% of output + offset) - Voltage: 0.03% + 10 mV - Current: 0.1% + 10 mA

E36313A 160W Triple Output Power Supply – Keysight

Output Rating- 160 W - Output 1: 0 to 6 V, 0 to 10 A - Output 2: 0 to 25 V, 0 to 2 A - Output 3: 0 to 25 V, 0 to 2 A Programming Accuracy ±(% of output + offset) - Voltage: 0.03% + 3 mV, 0.03% + 5 mV, 0.03% + 5 mV - Current: 0.05% + 4 mA, 0.04% + 3 mA, 0.04% + 3 mA Ripple & Noise (20 Hz to 20 MHz) - Normal Mode Voltage: <350 µVrms/ 2 mV p-p, < 1 mVrms/ 5 mVpp, < 1 mVrms/ 5 mVpp - Normal-mode current: <4 mA rms, <2 mA rms, <1 mA rms Readback Accuracy ±(% of output + offset) - Voltage: 0.04% + 3 mV, 0.03% + 5 mV, 0.03% + 5 mV - Current: + 0.05% + 5 mA, 0.04% + 3 mA, 0.04% + 3 mA - Low Range Current, 20 mA: 0.25% + 80 uA

EL34143A 350W Bench Electronic Load, Single Input 150V, 60A, 350W – Keysight

Input Rating - 0-150 V, 0-60 A, 350W Operating Modes - Constant Current, Constant Voltage, Constant Resistance, Constant Power Constant Current Programming Accuracy ± (% of output + offset) - Low, 0.6 A; 0.04% + 130 μA - Medium, 6 A; 0.04% + 2 mA - High, 60 A; 0.04% + 12 mA Constant Current Readback Accuracy ± (% of output + offset) - Low, 0.6 A; 0.04% + 120 μA - Medium, 6 A; 0.04% + 1.8 mA - High, 60 A; 0.04% + 9.6 mA

E36731A Battery Emulator and Profiler – Keysight

- Generate accurate battery profiles using the simulated current drain of a device. - Instantly emulate any battery charge state and display real-time current drain data. - Achieve accurate battery run-down tests by emulating your device’s current drain. - Estimate battery aging effects to predict device performance throughout its lifetime. - Streamline your workflow with an integrated power supply and an electronic load. - Creates a battery model for any battery type. - Power up to 200W, 30V, and 20A.

N6705C DC Power Analyzer – Keysight

- Ammeter accuracy: Up to 0.025% + 8 nA; up to 18 bits - Arbitrary waveform generator function: Bandwidth up to 100 kHz, output power up to 500 W - Data logger function: Measurement interval from 20 µs to 60 seconds, with a maximum of 50,000 readings per second - Scope function: Digitizes voltage and current up to 200 kHz, 512 kpts; up to 18 bits - Voltmeter accuracy: Up to 0.025% + 50 µV; up to 18 bits

B2912B Precision Source / Measure Unit (2 ch, 10 fA) – Keysight

The Keysight B2912B precision source / measure unit (SMU) is a 2-channel, compact, and cost-effective benchtop SMU with the capability to source and measure both voltage and current. It easily measures current versus voltage (I/V) with high accuracy. The 4-quadrant source and measurement capabilities enable taking I/V measurements without configuring multiple instruments. Measurement Capabilities - Configuration supports two-channel setup - Minimum source resolution at 10 fA / 100 nV, minimum measurement resolution at 10 fA / 100 nV - Maximum output at 210 V, 3 A DC / 10.5 A pulse - Waveform generation (arbitrary) and digitizing capabilities from 10 μs interval Key Features - Measurement capabilities with an integrated 4-quadrant source - Color 4.3-inch display supports both graphical and numerical view modes - Application software facilitates PC-based instrument control included at no charge - High throughput and SCPI command support conventional SMU’s command set

PZ2100A High-Density Precision SMU Mainframe (4 slots, 1U) – Keysight

- 20x higher channel density than conventional SMUs - 20 Ch in 1U rack height, full width - Flexible scalability with 5 SMU module options having pulse / digitizer in one resource - Single box solution with <100 ns synchronization accuracy supporting 20 channels at max. - Basic and advanced control software on PathWave for excellent operation and user experience - User-friendly graphical user interface collectively managing 20 channels at max.

E4980B Precision LCR Meter, 20 Hz to 2 MHz – Keysight

Frequency - 20 Hz to 2 MHz, with four-digit resolution in any range Basic accuracy - 0.05% basic accuracy with accurate measurement repeatability at low and high impedance DC bias - DC bias enhancement (Keysight Option 001) More features - 20 Vrms test signal (Keysight Option 001) - High-speed measurements at 5.6 ms - 201 points list measurement sweep - Versatile PC connectivity (LAN, USB, and GPIB)

34470A Digital Multimeter, 7.5 Digit, Truevolt DMM – Keysight

The Keysight 34470A 7½ digit, Performance Truevolt Digital Multimeters offer higher levels of accuracy, speed and resolution. - Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis. - Measure with confidence, with high basic DCV accuracy of 16 ppm. - Test low power devices with 1 µA range and pA resolution. - Flexibly automate measurements over USB or LAN/LXI core interface. - Digitizing and advanced triggering (DIG) now included.

DAQ973A Data Acquisition System – Keysight

- 3-slot mainframe with USB, LAN and GPIB interfaces - 6 1/2-digit (22-bit) internal DMM, scanning up to 450 channels per second with new solid-state multiplexer module - 9 switch and control plug-in modules to choose from - 24-bit sampling rate of 800 kSa/s with a new DAQM909A 4 channel digitizer module - Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance, frequency/period, diode test and capacitance - 100k readings of non-volatile memory holds data when power is removed - Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs - A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences

Skydel GSG-8 Gen2 GNSS Simulator – Safran

- 2000+ signals - All MF/MC Signals via Individual or Composite Port - Up to 6 vehicle or antennas in a simulation - Simulate jamming, spoofing, meaconing, interference of all kind - Unlimited number of jammers - 1000 Hz simulation iteration rate - Available in three configurations with up to 6 SDRs - Sub-nanosecond-level synchronization between RF bands - High-end RF quality - Simulate hundreds of satellites in real time - Multi-vehicle simulation - API (Python, C#, C++) - IQ file generation and playback

Testhouse Nordic is now the official distribution partner of Rohde & Schwarz in Finland and Sweden

As the authorised distributor of Rohde & Schwarz products, Testhouse Nordic is dedicated to bringing you top-quality tools and technologies that will empower your business, research, and projects.