Innovations

The 19”, 3U power distribution unit Rack Safety Plus supplies AC mains power and DC power to electrical or electronic devices as a central power switch with emergency stop function. 400 V 3-phase, 230 V 1-phase mains input with mains fuses, 1-phase 120 V AC (phase to neutral) or 1-phase 208 / 240 V AC (phase to phase or phase to neutral) AC outputs with different connector types from Schuko, C13, C19, NEMA 5-15R etc. connectors, switched by ON/OFF switch Permanent AC Outputs (Service) All outputs are protected by circuit breakers The emergency stop function meets the requirements of EN 60947-5-1 and EN 60204-1 and is vandalism-proof Choose a standard configuration, or quickly and easily create own configuration from predefined components.

The 6TL36 test handler is the first ATE handler on the market that easily integrates the radio frequency tests into mass production lines. The modular approach of the 6TL36 offers the possibility of adding handlers together for a work in parallel that reduces the cycle time and saves costs as well as space, when comparing to traditional parallel solutions. Therefore, the system can be ordered with only one conveyor, with two conveyors (bypass or dual-line) and with three conveyors (Retour conveyor). The 6TL36 is the best production solution to test the products that feature the latest challenges set out by the IoT and the manufacturing of connected products.

Certainli assists electronics companies in selecting the right components from a compliance perspective, thereby managing the growing regulations surrounding components. The AI-supported platform automatically searches for and provides access to verified supplier documentation required for certifications such as CE marking – a task that is otherwise time-consuming and risky to handle manually. The platform can be easily linked with the companies' existing systems, making compliance an integrated part of the development process. With Certainli, the risk of late component changes and costly delays is reduced, while products reach the market faster and remain there more securely.

CEA helps companies analyze and compare measurement data from complex electronic systems to reveal stability, deviations, and behavioral patterns more clearly. This provides stronger decision support, reduces the risk of costly redesign loops, and can shorten the path from testing to a finished solution.

The new microdispenser was specially designed for the lowest limit ranges of dispensing quantities and is currently the world‘s most precise volumetric microdispensers in its class! In this way the eco-PEN XS 180 is a milestone in microdispensing technology (~0,25μl). In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to convert the complex geometries of the screw auger and the stator into this small design. Material can flow and be metered in very small volumes, fully volumetrically, out of the valve and also in reverse inward fashion. This ensures a very clean and precise dispensing of the material. High precision +-1% Easy bleeding screw Low weight of approx. 175 g High axis acceleration possible Narrow grid spacing with ~25 mm Bead widths of >0,1 mm* Low shearing Very low dead volume ~0,9 ml Measuring Length 178 mm Width 22 mm Depth 65 mm Functionality The preeflow® eco-PEN XS 180 is a rotating, pressure-tight displacement system. It consists of a stainless steel rotor and an elastomer stator which together form a self-sealing system. This creates individual, self-contained volume chambers. As a result of the rotational movement of the stator, the volume chambers are pushed further, thereby generating the material flow. For low-viscosity products, the system is self-priming. To control the preeflow speed control "plug n dose" is required.

Edgewise winding is one of the modern trends in coil manufacturing. The principle of this winding technology is that the rectangular section wire is wound not on the flat part of the wire but on the short side of the wire. That’s what the terms edgewise winding or side-winding stands for.

Hexatronic FieldLink is a reliable field deployable cable solution that is designed for advanced military communication systems. The FieldLink solution is based on our long experience and deep knowledge of rugged fiber optic products that let us help our customers such as defence agencies, integrators, and major system manufacturers to design and supply reliable connectivity solutions. For use in applications including: - Ground Based Air Defence Systems - Mobile Tactical Shelters - Point-to-Point (P2P) Communication - Radar Systems - Reliable Mining Connectivity - Ship-to-Shore Links - Tactical Deployable Communication - Weapons Control Systems FieldLink cable assemblies are designed with expanded beam technology for high optical performance and high reliability connections, combined with our Hexatronic MIL-TAC (Military Tactical) cable it makes an ideal fiber optic connectivity solution for harsh environment applications where deployment and retreival of fiber optic cable for reuse is required. Instead of traditional sheet metal drums, we choose MARS® cable reels that are constructed of an impact modified polymer for high surviability and with the advantage of eliminating rust resulting from field operations. Designed with interlocking stacking and integrated connector storage, allows the reels to be stacked and interlocked during transportation and storage. MARS® is a modular solution available with different deployable tripods, frames and backpack solutions. Specification: - 1 to 16 optical channels - Singlemode or Multimode - Expanded beam connectors - Deployable MIL-TAC cable - > 1 000 meter cable capacity

Measure the impossible FSWX signal and spectrum analyzer In today’s fast-paced technological landscape, having a reliable and efficient signal analysis solution that can transcend the limits and overcome the limitations of traditional measurement methods is crucial. The cutting-edge multipath FSWX architecture brings a new level of performance and precision to signal analysis. By applying preselection, suppressing inherent noise and spurious signals and minimizing unwanted artifacts, the FSWX ensures that the true characteristics of the signal under test are accurately captured and analyzed.

Eurocircuits’ HDI Pool PCB manufacturing and assembly service enables designers to integrate microvias into their layouts for fine-pitch components, while benefiting from the cost advantages of pooling. More frequently designers are finding that key components — previously available in standard packages — are now only available in very fine pin pitch packages. Whilst this may only apply to one or two components on your PCB it will require complex fan-outs using via in pad (microvias) solutions. Our HDI pool allows you to incorporate these components in your design with the necessary track widths and microvias without making the whole design a high-density interconnect layout. Our pooling prices are based on panel-sharing, while non-pooling prices are calculated using a production panel tailored to the specific options and job. PCBs can be supplied as single circuits or panels.

Structured HMI development from concept to production • Design and engineering with production in mind • Flexible support tailored to your development needs Mekoprint’s HMI design services support the development of intuitive, robust and production-ready HMI solutions. The design and engineering team works as an extension of the customer’s organisation, providing specialist HMI expertise where needed – from early concept to release for production and throughout the product life cycle. The services are structured into clear development stages, allowing customers to engage Mekoprint at any point in their development process. Support can range from targeted design or engineering tasks to full project ownership, depending on resources, timelines and project complexity. The focus is always on creating solutions that are feasible to manufacture and ready for serial production. By combining design, engineering and manufacturing knowledge, Mekoprint helps reduce iterations, mitigate risk and accelerate time to market. Early involvement ensures that usability, durability, cost and production requirements are addressed from the start, resulting in HMI solutions that perform reliably throughout their lifetime.

The IMU TAG350 is a sensor that combines MEMS technology (Compact Inertial Sensor Unit) with a FOG (Fiber Optic Gyro). This combination enables highly accurate positioning for autonomous applications. Even during signal loss, positioning remains stable and reliable, making it ideal for operation in harsh environments. Typical applications include AGVs, autonomous driving systems and autonomous robots.

We provide reliable connectivity solutions and hands-on training to strengthen a new generation of network designers, installers, and field service technicians. Our employees at Hexatronic are experts in fiber and wireless communications. Why partner with us? Real-world experience: We have real-world experience designing and building networks and an unparalleled ability to share this knowledge in an exciting and informative way. Public safety and preparedness: Hexatronic provides fiber optic solutions that enables reliable communication links, high-speed access points and secure critical infrastructure. We are here to support field technicians in critical situations and provide rugged connectivity solutions for temporary deployment and maintenance equipment designed for functionallity. Anywhere, anytime: We partner with our customers. By understanding your challenges, we can overcome them together. With a strong local presence, you can enjoy quick on-site support, relevant training, and dedicated attention to your needs. Local manufacturing also brings down the delivery times. Hexatronic is there as your partner. All the way. Tailored courses: Edugrade offers courses that are designed specifically for today's fiber optic and wireless networks but can always be tailored to your specific requirements. What do you need to make your project succeed? - Contact us for more information.

LiquidFlow 30M is a compact Plug & Play system for automated dispensing and mixing of two-component materials (2K), such as polyurethane, epoxy, and silicone with low to medium viscosity. The system delivers consistent quality, shorter cycle times, and minimal material waste, making it ideal for both small and medium-sized production lines. Electrically driven gear pumps ensure a constant, pulsation-free flow and precise ratio control, even when flow rates or material densities change. The dynamic mixer provides a homogeneous blend and minimizes the risk of air bubbles, ensuring proper curing. The system can handle flow rates of up to 30 liters/min, depending on the material and viscosity. The closed system protects the operator, reduces exposure, and creates a safe and ergonomic working environment. Its compact design facilitates installation, integration, and maintenance, while adjustable pumps and flexible valve placement offer high adaptability. LiquidFlow 30M is a reliable solution for those looking to transition from manual to more automated 2K handling, with a focus on quality, efficiency, and safety—all in a convenient Plug & Play solution.

LiquidShot 3B is a versatile, compact dispensing system designed for precise and efficient processing of two-component materials. With its robust design, high repeatability, and minimal material waste, it’s ideal for small to medium production runs. The system ensures accurate dosing, reliable mixing, and a safe, user-friendly operation, making it the perfect solution for high-quality 2K applications.